Acrylic paints first appeared on the paints and varnishes market in the late 1940s. These are water-based paints based on acrylic acid derivatives, which are easy to polymerize. Over time, they began to supplant traditional oil paints due to their advantages.
Features of acrylic paints and varnishes:
- Are a non-toxic, odorless aqueous emulsion
- Easy to apply to any non-greasy surface
- Provides a breathable coating
- Dry quickly
- Does not crack even in a thick layer
- Wear resistant
- UV resistant
- Do not fade
Uncured acrylic paint can be easily washed off with water
Acrylic or acrylate?
Often these two words are considered synonymous. In a sense, this is true, since in both cases the same group of polymers serves as the basis. The difference is that acrylate paints contain additives – copolymers, which give it additional properties. Usually, vinyl is used as a copolymer, which increases the elasticity of the paint and reduces its cost (acrylic itself is quite expensive). There are paints containing both an acrylic component and alkyd resins – they combine the advantages of alkyd and acrylic paints and are distinguished by high moisture resistance, elasticity and strength.
Surfaces that can be painted with acrylic and acrylate paints:
- Mineral surfaces: brick, concrete, plaster, drywall
- Wooden surfaces: planed, sawn, logs, chipboard, fiberboard
- Wallpaper for painting
The acrylic emulsion Malaysia concern produces high quality acrylate and acrylic paints for various types of surfaces. Acrylic paint is the standard in its class of materials.
Acrylic paint – how to use
Storage. It is necessary to store and transport acrylic and acrylate paints at positive temperatures.
Surface preparation. The technology is standard: the surface is cleaned from dirt, dedusted and degreased (if necessary). Surfaces prone to crumbling and shedding must be primed, external wooden surfaces must be treated with an antiseptic or fire-retardant bio-protection.
Dyeing technology. Stir the acrylic paint thoroughly before painting. Coloring is carried out at a temperature not lower than + 5˚C using a brush, roller or spray. Usually two coats are applied with an interval of 2-3 hours. Rinse tools after use under running water.
Precautions. Since acrylic paint is an aqueous emulsion that does not contain organic solvents, a respirator and gloves will suffice. The paint on the skin is washed off with soap and water. For more articles such as this one, click here.